• Used EquipmentUsed EquipmentUsed EquipmentUsed EquipmentUsed Equipment

Used Equipment

Welcome to the Danagri-3s Used Equipment and special offer section.

Below are our listings for various pieces of quality used equipment along with special offers on demo / shop soiled equipment.

Please contact us for further details on anything you may be interested in.

Solo single stage grain screen cleaner with 3-phase motor, cleans approx. 2-4 tonnes per hour. Being a single stage it has only the one cleaning screen that the grain passes over and and anything over 10mm ie the stalks, chaff and stones will be removed however sands and impurities smaller than 10mm will still pass through.

We only have one at this Price £2,100.00 plus VAT and Carriage.

An exceptionally clean M90 Alvan Blanch 1 tonne Batch mixer unit with roller mill is being offer for sale by a local customer.

Constructed of robust heavy gauge steel the Mill and Mix system is ideal for blending a wide range of dry products. Liquid molasses can be evenly applied via an optional dribble bar of up to 10%. Holding capacity of approx. 1 tonne based on rolled grain as it's main ingredient.

Offers around £6,500.00 should secure, however all viewing and negotiations will be done directly with the customer.

Please contact us for further information.

One of our valued customers is in the process of upgrading their grain store so they now have available a quantity of metal floor store laterals.

180 x laterals 3' x 10" and approx. 25 half lengths and the same quantity of ends. All dating to the mid 80s but in excellent condition.

The items are  located on farm in the Leicestershire area, the farmer is willing to help the purchaser load the items. Negotiations and viewing will be directly with the customer. Please contact us for further details.

Here we have an AB 500 (13.5ton) Farm Fans Grain Drier with the upgraded series 2000 auto batch drier control panel. Although this is only a 2011 model, the customer has decided that now is a good time to upgrade to a larger Q220 quiet drier model. Overall the dryer is in superb condition, the owners have really looked after it having had it regularly serviced & maintained, cleaning it at the end of each season.

Maybe interested?  then give us a call and we can tell you more.

Now Reserved for Customer

One only! NEW (Ex-display model) BM Silo M-125 with a 60° hopper bottom, Size 1300 x 1300mm width 2.40m high, Volume 1.73m3 with a content holding capacity of 1.12 tonnes based on a content weight of 650kg/m3 comes with a flat roof and hopper bottom slides.

The Silo's normally come as a flat pack to assemble but this one's already assembled for you!

NEW these are £1,798.00 plus VAT and carriage

OFFER PRICE £1,250.00 plus VAT and carriage.

After upgrading a customers Feed Mill set-up they have asked if we could list the following items 2 x Kongskilde (Skiold) DM3 Hammer Mills complete with stone traps along with 2 x Feed Holding Hoppers and Cyclones above each Hopper. Although the Hammer mills have seen a bit of work over the years they have been well looked after and serviced, having low hour screens and hammers. These can be viewed in-situ on farm.

We now only have 1 x Hammer Mill and Cyclone left for sale!

Please contact us for further details

Hutchinson 8" Power Sweep Unload System to suit an 18' Grain Silo

The machines are new and unused but shop soiled. The system comes with a Sweep Auger & back board, intermediate wells, centre drive well and control rods.

New these would retail at £4,500.00

Bargain at half the Price!

Please contact us for further details

 

 

Grain Auger hopper available to fit 6" 8" and 10" auger pipes.

Secured via straps to the auger tube and made from flexible plastic to shrug off accidental bumps and bangs the bright yellow colour aids visibility when maneuvering grain trailers towards it.

This is a perennial favourite with our customers 

Price £160.00 plus VAT Ex works   Watch Video Here

Please contact us for further details

We have 2 x HDH - 770 Hammer Mills for sale for use with straw or woodchip, supplied by us new to a straw processing plant, we have taken them back as a p/x upgrade for larger machines.

For your peace of mind they have both been through our workshops and have had all the wearing parts replaced with new, they come complete with 45kw 3- phase motors.

 

Price £7,000.00 plus VAT each.

Please contact us for more information.

2 x Cormall H1400 Cyclones for sale with 2 x 300mm inlets and 1 x 500mm top outlet. Fitted with flanges to accept Rotary Valves.

New these would cost £4,000.00 each

Please contact us for further details.

Newsletter Sign Up Stay in touch with us at Danagri-3S by signing up to our regular newsletter.