The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
STRAW PROCESSING MILLS PAGE
Danagri-3S supplies two types of Hammer Mill for straw and biomass, the Cormall HDH770 and the RJA range of heavy duty mills.

The HDH 770 straw hammer mill from Danagri-3S
The HDH 770 (left)

The HDH 770 straw hammer mill is used in conjunction with our RBS 260/300 shredders (click here to find out more) to mill straw up to 4000 kg per hour. It is therefore supplied with heavier duty electric motor drives: either 22, 30, 37, 45 or 55 kW.

The effect of using Cormall Straw Mills - high quality end productThe huge advantage of our straw mills is that they not only cut the straw to a pre-determined length but, more importantly, they lacerate it which opens up the straw stem. This increases its absorbency and also gives access to all the minerals inside.


Function:

The HDH 770 consists of a rotor with 18 heavy duty flails, a screen and a blower rotor. The straw is sucked into the mill and beaten through the screen by the flail rotor. The airflow developed by the blower rotor sucks the straw into the mill and conveys it up to 30 metres through 300mm piping. we can also add extra booster blowers for longer distances. Good airflow is essential for optimum capacity.

HDH 770 straw hammer mill showing rotorsScreen Sizes

The HDH 770 is available with a large range of screen sizes. This means that there is a better opportunity to produce straw with smaller shredded lengths, approximately half the the screen size. The range is: 5 mm, 8 mm, 10 mm, 15 mm, 20 mm, 30 mm, 50 mm and 70 mm screens. The screen area is 0.52 m2.




The Danagri-3S RJA range of Industrial Hammer Mills
Danagri now offer a heavy duty, industrial range of Hammer Mills for high outputs. These can be used for straw, grain, wood chips and feed components.

We offer six different sizes of mills in this range, starting from 55kW up to 400kW motor sizes, with grinding chamber widths from 500mm to 1250mm and diameters of either 700mm or 1250mm.

One of the biggest features on these mills is the quick and easy system for changing screens; it really is a two minute job (see image below right).
The RJA range of Industrial Hammer Mills from Danagri-3S
The RJA range of Industrial Hammer Mills from Danagri-3S
The RJA range of Industrial Hammer Mills from Danagri-3S
The RJA range of Industrial Hammer Mills from Danagri-3S
Changing screens really is a two minute job!
Changing screens really is a two minute job!
Other features are:-
  • reversible motor allowing wear on both sides of the mill flails
  • reversible flails for longer life
  • anti-vibration feet
  • cassette system for changing screens
  • screen sizes from 1.00mm to 100mm are available
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: