|STRAW PROCESSING DUST EXTRACTION PAGE
|Danagri-3S supplies the Cormall Dust Extractor DE 350-1250.
The DE 350-1250 is suitable for the effective cleaning of chopped straw for industrial and agricultural purposes, producing chopped straw which is environmentally friendly and healthy for both humans and livestock.
Cleaned chopped straw is very suitable as a bedding material, as well as for applications within the industrial sector such as board manufacture. The Dust Extraction unit can be fitted almost anywhere. Interchangeable dust screens determine the level of dust and other particle extraction.
The dust extraction unit is mounted below a cyclone. The unit consists of a 350 mm auger with a cyclone inlet, a 3.0 kW electric motor running at 1400 rpm., a V-belt drive, a hinged suction box with a 100 mm outlet and a replaceable dust screen.
The chopped straw is blown into a cyclone, where the air is separated through a filter arrangement. (Cyclone and filter arrangement are not included).
From the cyclone, the straw falls into the auger and is conveyed towards the outlet, passing over a screen area where dust, sand and soil particles are sucked away by a suction blower.
The suction blower is equipped with a 1.5 kW electric motor running at 2800 rpm., a 100 mm inlet, a 100 mm outlet and a blowing length of approx. 30 metres through 100mm piping.
Dust screens are available in the following sizes: 2 mm, 3 mm and 3.5 mm.
Cormall also supply cyclones and filter arrangements specially designed for Dust Extractor units. Please contact Danagri-3S for more information.
Back to the top of the page.
|Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.