GRAIN HANDLING CHAIN LOOP SYSTEMS PAGE
The DMC Chain Loop System supplied by Danagri-3S is designed to move large capacities of grain gently and efficiently throughout the system. Chain Loop uses less horsepower than air systems and requires minimum maintenance. The Chain Loop system can be angled to accommodate conventional front unloaders.
An enclosed loop design provides a complete load-in/load-out system. DMC Chain Loop can be installed into new, or existing, bin drying or storage structures and are expandable after the original installation. Unload one bin or multiple bins and reduce drying costs by circulating high moisture grain from one bin, with previously dried grain from another bin.
|
DMC Chain Loop System from Danagri-3S
on a farm in Peterborough. |
Features:
- Corrosion and abrasion resistant, powder coat finished corners.
- Strong paddle brackets increasing system life.
- Inspection cover at the top of each discharge spout.
- Heavy duty 10 gauge slide gate in discharge spout.
- Paddles spaced every 4th chain link (about 10"). Shorter spacing adds life and reduces the load on the paddle chain links.
Back to the top of the page.
|
| Chain Loop System Specifications |
| Conveyor Chamber Dimensions Available |
8" |
10" |
| Maximum Capacity (BPH) |
4,000 |
6,000 |
| Chain Travel (FPM) |
325 |
325 |
| Tubing Gauge, Galvanized |
12 |
12 |
| Corner Housing Thickness, Galvanized |
3/16" |
3/16" |
| Paddle Thickness (UHMW) |
3/8" |
1/2" |
| Corner Shaft Diameter |
2" |
3" |
| Conveyor Chain Standard |
81X |
81XHH |
| Conveyor Chain Optional |
81XH |
- |
| Conveyor Horsepower Required* |
|
|
| Vertical (per foot of conveyance) |
.35 |
.50 |
| Horizontal (per foot of conveyance) |
.08 |
.11 |
| Weight (per foot) of Tubular Conveyor |
|
|
| Empty |
12 lbs. |
15 lbs. |
| Full 56 lb. per bu. material |
28 lbs. |
40 lbs. |
Back to the top of the page.
Other Equipment for the DMC Chain Loop System.
|
 |
DMC Chain Loop System - 90 Degree Discharge
with Gate and Wheel. Ground controlled access door on the top for inspection and service. |
 |
DMC Chain Loop System - Drive Corner
- 1 or 2 per system based on required horsepower
- 10" system up to 80HP - 2EA 40HP Drive Corners
- 8" system up to 60HP - 2EA 30HP Drive Corners
|
 |
DMC Chain Loop System - Inspection Corner
Access for inspecting chain and paddle wear as well as chain tightness |
|
DMC Chain Loop System - Standard Corner
- 1 per system when using 2 Drive Corners
- 2 per system when using 1 Drive Corner
- Replaceable, abrasion resistant liners
|
|
|
Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail:
|
|
|
|
