The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
FANS & HEATERS FROM DANAGRI-3S
Danagri-3S supplies a complete line of rugged aeration and grain fans and heaters to help maintain grain quality. Choose from a variety of high efficiency vane axial, centrifugal and inline centrifugal fans and heaters all with features designed to reduce cost and boost performance.

AERATION FANS

Our range of small mobile ST fans are ideal for aeration purposes and are available with 2.2kw, 4.0kw or 5.50kw motor sizes giving outputs between 3,500 and up to 7,800 cubic feet of air per minute.
Images of Aeration Fans above - click to see a larger image
Back to the top of the page.
FANS WITH HEAT EXCHANGERS

Danagri offer several versions of fans coupled to heat exchangers to make use of hot water to assist drying. These heat exchangers can vary between 50 and 1200kW with motors on the fans ranging from 3kw to 37kw.

Below are some images of fans and heat exchangers, all available from Danagri. Click each image to see a larger one.
GSI fan & heater - click to see a larger version Centrifugal Fan + Downstream Heater in Evesham - hclick to see a larger version
Back to the top of the page.
INLINE CENTRIFUGAL FAN

Inline Centrifugal Fan available from Danagri-3S.Danagri-3S offer a complete line of aeration and grain conditioning systems to help maintain grain quality. Choose from a variety of high efficiency vane axial, centrifugal and inline centrifugal fans and heaters all with features designed to reduce cost and boost performance.

Delicate drying jobs, such as milo, wheat or rape seed require special consideration. Aerating tall hopper tanks can be another challenge. The inline centrifugal fan is designed to handle both these applications effectively. Suited for high static pressures beyond the performance range of vane-axial fans, the inline centrifugal fan offers the same characteristics of a regular centrifugal fan, however it is much more economical. Sizes range from 1-1/2 HP to 15 HP, 18" to 28" diameters. Transitions are available to connect GSI fans to bins, aeration ducts or concrete entrance ways.

The Inline Centrifugal Fan from Danagri-3S (right)
Back to the top of the page.
CENTRIFUGAL FANS

Centrifugal Fan available from Danagri-3S.Danagri-3s offers a choice of two centrifugal fans each designed for unique applications. The rugged 3500 RPM fan assures powerful high static pressure grain aeration, and the 1750 RPM fan is available for medium static pressures requiring high airflow. Heavy gauge, galvanized steel housing, curved inlet Venturi, bottom horizontal discharge and integral motor mount are important features of GSI Centrifugal Fans. All fans are statically and dynamically balanced and factory tested for smoothness and motor performance.
Heavy-duty motors are used for both the 1750 and 3500 RPM fans. GSI associates test each motor to ensure durability under tough operating conditions.

Centrifugal Fan from Danagri-3S (left)

VANE-AXIAL HEATERS

Vane-Axial Heaters from Danagri-3S.Whether you're natural air drying or heat drying grain, all drying fans supplied by Danagri-3S give you the option of adding a heater if the need arises. With capacities up to 2.7 million BTU/hr., our vane axial fan and heater combination provide the best in high capacity grain drying. Vane axial heaters are available in 18" through 28" diameter, liquid propane, propane vapour or natural gas.

All Heaters supplied by Danagri-3S include:
Quad Pipe Train and Burner Design to allow the heater to work HI-temp or LOW-temp (down to 10 degree temp rise); Patented blue-burn optimizer on propane models; Transition high limit switch; Liquid filled pressure gauge; Automatic ignition shutoff after proof of flame for extended igniter life.

Vane-Axial Heaters from Danagri-3S (right)
Back to the top of the page.


Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: