The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
CHAIN CONVEYORS & ELEVATORS PAGE
The Danagri/JE-MA T20/T40 Chain ElevatorChain conveyors supplied by Danagri-3S are designed with a special base and chain that ensure total emptying of the conveyor. The trapezoid chain conveyor is in particular suitable for conveying tasks where frequent product changes require limited potential for product mixture.

T20/T40

The Danagri/JE-MA Chain and Flight Elevators are suitable for most agricultural applications as an alternative to a Belt and Bucket Elevator.

  • They can operate with most granular materials, flour or meal and at any angle between horizontal and vertical.
  • They are very useful where headroom and pit depths are limited.
  • Elevators are manufactured from galvanised material and in accordance with the E.U machinery directives.
  • These elevators utilise their total height very efficiently with only 48cm lost from the elevator top point to the outlet flange.
Standard elevator lengths from 3-18 metres are available and there are three different feeding alternatives:
  • inlet with propellers
  • inlet with delivery auger
  • inlet for flood feeding
  • capacities range from 12-40 tonnes per hour
The Danagri/JE-MA T20/T40 Chain Elevator The Danagri/JE-MA T20/T40 Chain Elevator
T20/T40 Power Consumption
Length in metres 3-4 5 6-7 8-9 10-11 12-13 14-16 17-18
T20 1.5 1.5 2.2 2.2 3.0 3.0 4.0 5.5
T40 2.0 2.0 3.3 3.0 4.0 4.0 5.5 5.5
Extra power consumption per metre auger in trough diameter 135 = 0.18kW


Back to the top of the page.

The Danagri/JE-MA T20/T40 combined with 90° bend and T44/T45 Chain ElevatorT44/T45

The chain and flight conveyor is constructed from standard modules and may be fitted into any intake pit. The length of the troughs are: 0.5, 1.0, 1.25 and 2.0 metres.

The strong chain is supplied with 6 carriers per metre to give clean fast movement of grain.

The tightening device is integrated in the drive station.

The T44 may be driven by a standard motor 1000 rpm via a v-belt pulley drive or by a direct coupled geared motor. The T45 is driven by a direct coupled geared motor only.


The Danagri/JE-MA T20/T40 combined with 90° bend and T44/T45 Chain Elevator
Back to the top of the page.

T44 & T45 Technical Data
Capacity
V-belt pulley set
R. P. M.
T44 - tph
T45 - tph
Motor 1000 rpm 63-355 166 to 35 -
Motor 1000 rpm 75-355 198 to 40 -
Geared Motor - 125 to 30 to 50
Geared Motor - 160 to 35 to 65
Geared Motor - 200 to 40 to 80
Power requirement (HP)
T44 20 tph
T44 40 tph
T45 60 tph
T45 80 tph
to 5m *1.5 *1.5 3.0 3.0
6 - 12m *1.5 *2.0 3.0 4.0
13 - 20m *2.0 3.0 4.0 5.5
21 - 30m 3.0 4.0 5.5 7.5
31 - 40m 4.0 5.5 7.5 -
41 - 50m 5.5 7.5 - -
*The minimum size geared motor available is 3.0 HP


  Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: