The Livestock Centre, Tasley,
Bridgnorth, Shropshire,
WV16 4QR, UK.
Tel: 01746 762777
Fax: 01746 764777
E-mail:
Animated Danagri-3S Logo
GRAIN HANDLING BELT CONVEYORS PAGE
The JE-MA T51/T52 V-Shaped Belt Conveyor available from Danagri-3S
The JE-MA T51/T52 V-Shaped Belt Conveyor available from Danagri-3S
The JE-MA T51/T52 V-Shaped Belt Conveyor available from Danagri-3S The JE-MA T51/T52 V-Shaped Belt Conveyor available from Danagri-3S
The JE-MA T51/T52 V-Shaped Belt Conveyor.

The Danagri/JE-MA T51/T52 V-shaped belt conveyors on rollers are:
  • Designed as a standard module system.
  • Galvanised steel plate construction.
  • Low energy consumption per ton conveyed.
  • T51 has a capacity of up to 80 t/hour (grain).
  • T52 has a capacity of up to 120 t/hour (grain).
  • The belt conveyors can transport materials in both directions.
  • Capable of transporting in angles up to 35° from the horizontal (with the use of carriers, but with reduced capacity).
  • Capable of transporting almost any material.
  • Delivered in widths of 500 mm and 650 mm respectively.
  • The belt conveyors can also be mounted with 15 cm side plates, tripper carriage, guide rollers etc.
  • T51/T52 can be delivered for fixed mounting and with outlet from one or both ends - or along the belt, with a tripper carriage.
  • The belt conveyors can also be delivered for mounting on movable runners with or without automatic electrical controls.
T51/T52 - Weight in Kgs
Weight T51 T52
Drive station (1.0 m) with 2.2 kW motor 110 131
Drive station (1.0 m) with 3.0 kW motor 135 156
Drive station (1.0 m) with 4.0 kW motor 141 162
Tightening section (1.0 m) 73 94
1.0 metre extension 25 31
Tripper carriage 115 148
Weight of grain per metre conveyor 24 36
T51/T52 Standard Features:
  • Drive station 1.0 m with worm geared motor.
  • Tightening section 1.0 m.
  • Extension sections 1.0 m and 2.0 m.
  • Belt quality: EP 250/2, 3:1.5.
  • Conveying side rollers: V positioned/each 0.5 m.
  • Return side rollers, each 2.0 m.
  • Tightening of the belt possible at both ends.
T51/T52 Accessories:
  • Oil resistant belt.
  • Carriers vulcanised on the belt.
  • 15 cm side plates.
  • Inlet hopper in galvanised steel.
  • Outlet skirt in galvanised steel.
  • Movable tripper carriage.
  • Guide rollers.
  • Double runners for movable suspension.
  • Special rails system for cross conveying.
  • Electrical winches for automatic filling and levelling system.
Back to the top of the page.

The JE-MA T19V Belt Conveyor available from Danagri-3S
The JE-MA T19V Belt Conveyor available from Danagri-3S
The JE-MA T19V Belt Conveyor available from Danagri-3S
The JE-MA T19V Belt Conveyor.
The Danagri/JE-MA T19V Belt Conveyor is a modular system based upon standard components which, when correctly combined, will suit any transportation arrangement. The conveying element is a belt (25-50 tonnes/152 mm wide, and 80 tonnes/303 mm wide) which conveys grain, seed and any other granulated materials through a special U-formed groove.

From the outset, the intention was to construct a belt conveyor that featured small outer dimensions, was low in weight, easy and quick to mount and with built-in flexibility. T19V belt conveyors are suitable for both horizontal and slightly raised conveying (to a maximum of 6°) and materials can be conveyed either towards the drive station (one-way conveyance) or both forward and backward (2-ways conveyance).

T19V belt conveyors consist of a drive section, a tightening section, extension sections and a possible discharge section. Further extension sections are available in sizes from 0.5 to 2.5 m. When mounted it is possible to obtain lengths up to 50 m and in 0.25 steps.

If the material has to be delivered through several places along the conveyor, one (or more) discharge sections are placed wherever required.

T19V conveyors are especially suitable for movable suspension on special rails. Material can be discharged continuously over the whole rail length and at both sides of the inlet piece.

T19V - Power Consumption
Capacity 1.1 kW 1.5 kW 2.2 kW 3.0 kW 4.0 kW 5.5 kW 7.5 kW 11 kW
25 tph 1500 rpm to 6 m 7-10 m 11-15 m 16-25 m 26-38 m 39-50 m - -
40-50 tph 1500 rpm - to 5 m 6-9 m 10-15 m 16-22 m 23-36 m 37-50 m -
60-80 tph Electric - - - to 5 m 6-15 m 16-25 m 26-40 m 41-50 m
Back to the top of the page.
Copyright © Danagri-3S Ltd
The Livestock Centre, Tasley, Bridgnorth, Shropshire, WV16 4QR, UK.
Tel: 01746 762777. Fax: 01746 764777.
E-mail: